1970 Chevelle's "SS" options (Malibu series)

[ 1964 ] | [ 1965 ] | [ 1966 ] | [ 1967 ] | [ 1968 ] | [ 1969 ] | [ 1970 ] | [ 1971 ] | [ 1972 ]

Any comments/corrections/additions please send them to me and be sure to specify which year.

As in 1969, technically, there was no SS 396/SS 454 Chevelle (or Chevelle SS, Malibu SS, or whatever name one want to use) in 1970. The two SS equipment packages offered in 1970 were still options.

The 1970 model year added a second SS option, RPO Z15 for the SS454. Both the Z15 (SS454 )and Z25 (SS396) still remained an option on any V8 Malibu 2-dr sport coupe, convertible, or pickup body style and gone was the 1969 one year only availability of the SS396 option on the 300 Deluxe coupe and sport coupe.

The only way to truly document a 1970 Chevelle as having the SS396 or SS454 option is with some sort of paperwork showing the option itself or the stamped engine suffix code and partial VIN matching the car's VIN matching. Examples would be the build sheet, warranty card Protect-O-Plate showing a 396 or 454 engine suffix, or an original factory stamped engine where the partial VIN stamping is a match to the car's VIN.

There is a bit of engine confusion for 1970. The venerable 396 received a +.030 bore to bring it to 402 cubic inches. Chevrolet was already heavily invested in the SS396 mystique so this slightly larger engine was still referred to as a "396." Why the 396 was bored to 402 isn't exactly known although there are plenty of thoughts on the subject. The one I would conform to is there were different emissions regulations for engines over 400 cubic inches than there were for engines under 400 cubic inches and this was an easy way out for Chevrolet without having to design a new Mark-IV engine and still have two engine sizes for SS Chevelles.

To compound the matter a bit more, a second 402 cubic inch engine was introduced under the regular production option code of RPO LS3. Essentially the same engine as the L34 available in the SS396 but with no chrome trim (valve covers, air cleaner, etc.) and a slightly less horsepower rating of 330hp. The LS3 engine was available in any series and body style available in 1970 except an SS-optioned V8 Malibu.

If you're not already confused with the L34 vs. LS3 402 cubic inch engine, Chevrolet also introduced a 400 cubic inch small block engine (RPO LF6) for full size cars and the Monte Carlo. Chevrolet continued to call the L34/402 a "396" and they called the LS3/402 a "400-4" or "400 Turbo-Jet" while they called the small block 400 engine a "400-2" or "400 Turbo-Fire." The "-4" and "-2" referred to the carburetor for each engine and all big-block Chevrolet engines were "Turbo-Jet" while small-bock engines were "Turbo-Fire"; the LS3 got a 4-barrel while the LF6 (RPO LF6) received only a 2-barrel. The LS3 engine will become important in 1971 & 1972 as well.

The 1970 RPO Z25 SS396 option included the L34 396/350hp engine with the L78/375hp engine available until GM cancelled the L78 engine on October 30 of 1969 with the announced release of the LS6/450hp version of the 454 engine. Part of GM's letter states, "In conjunction with the release of LS6 450-hp engine, the 375-hp Engine Option L78 and the L78/L89 for use with SS 396 is in process of being cancelled, and further orders for these options should not be submitted." The L78 engine cars already in the pipeline were allowed to proceed until L78 engine stocks at plants were depleted. If there were no more L78 engines to complete orders, those orders were returned to the dealer and customers had to make a different engine choice. See my LS6 Registry site at http://ls6registry.com/tech/trivia.htm for more details of the cancellation of the L78 engine and release of both the LS5/360hp and LS6/450hp 454 engines.

Interior

Contrary to popular belief bucket seats and/or gauges were not standard equipment. A front cloth/vinyl bench seat (except the El Camino and convertibles got all vinyl bench seat standard), no gauges (except speedometer and fuel gauge) were standard with the RPO Z25 SS396 option and the Z25 option required either the Muncie M20/M21 4-speed manual or M40 TH400 3-speed automatic. The RPO Z15 SS454 still did not come with bucket seats or gauges but it did mandate either the optional M22 Muncie 4-speed manual or a heavy duty M40 TH400 3-speed automatic.

RPO A51 bucket seats did NOT mandate a center console. Although the majority of bucket seat optioned Malibus ordered a center console, it was not mandatory. There were 99,138 A51 bucket seat options sold in 1970 Chevelles but only 90,436 center consoles.

Dash

Both SS options also included a different dash than their non-SS counterparts. Round gauge pods housing the fuel gauge and speedometer replaced the sweep design of non-SS Chevelles. A word of caution here though, any V8 Malibu coupe, convertible, or El Camino could order RPO U14 Instrument Panel gauges and get the same round gauge pod dash and it would include a tachometer, (moved) fuel gauge, speedometer, amp and water temperature gauges. So, a base SS-optioned Malibu would have the round gauge pods but no tachometer, no amp and no water temperature gauges unless RPO U14 was ordered in which case it got the same gauges with the exception of the redline on the tachometer.

It's uncertain if the clock was part of RPO U14 Instrument Panel gauges or not. Available GM documentation says the clock was part of RPO U14 but I have numerous 1970 Chevelle SS396/SS454 build sheets with the gauge option and no clock shown as well as clock option without gauges. There was no listed option/choice to delete the clock from the package or why anyone would want to is open to speculation. The clock was available separately under RPO U35 on both SS and non-SS optioned Chevelles and the clock was standard equipment on the Monte Carlo whether gauges were ordered or not.
Base Chevelle/Malibu dash with 'sweep' speedometer.

Base SS (396 or 454) dash with round gauge pods for fuel and speedometer. Note warning lamps for GEN (upper left), TEMP (upper right) and OIL (lower right).

Another base SS dash with optional clock, no tach or gauges.

SS or Malibu dash with optional RPO U14 Instrument Panel gauges. Not visible is the amp gauge that has been moved to the upper left opening replacing the GEN lamp. The TEMP gauge replaces the TEMP lamp in the upper right opening and the fuel gauge is located in the old OIL lamp opening. The oil warning lamp is now moved to the lower center of the tachometer. This dash is from an LS6 as noted by the redline on the tachometer although an L78-optioned Chevelle will have the same redline tachometer when gauges are ordered.

These examples show the AMPS gauge location but note there is no clock which is reported in GM documentation to be part of RPO U14 Instrument Panel gauge option. It's unknown why numerous Chevelles have been found with the U14 option but no clock.

Prior to 02-10 Baltimore did not show U35 on their build sheet when U14 was ordered but all Baltimore build sheets from 02-10 to the end of production do. Same with Kansas City but the date of change is different, 10-06. All other plants showing RPO U14 also show RPO U35. Both of the photos above are from Kansas City L78 Chevelles so they are obviously early model year.

The tachometer redline might also give you some indication of which engine was installed. All 3 have the same range, 0-7000, but the redline differs depending on engine (and plant it has been discovered).
See Tachometer Broadcast Codes.
1. The 307 and two 350 engines tachometers redline at 5000 RPM (broadcast code 938).
2. The 402/330 (LS3), 396/350 (L34) and 454/360 (LS5) engines tachometers redline at 5500 RPM. * (broadcast code 985)
3. The high performance 396 (L78) and 454 (LS6) redline at 6500 RPM. (broadcast code 983)
* To date, all documentation shows that the Atlanta plant installed the 5000 RPM redline tach in all base SS454 Chevelles through at least late April. It is assumed this was a computer programming error that generated the code for the 5000 RPM tachometer instead of the 5500 RPM unit. This appears to have been 'fixed' by at least 05-05. The code for the 3 different tachometers can be found in block #72 of the build sheet; 938 for the 5000 RPM redline, 985 for the 5500 RPM redline, and 983 for the 6500 RPM redline.

Here is a documented Atlanta LS5 Chevelle with a build sheet schedule date of 1-25 with a 5000 redline tachometer.

Note the oil warning lamp in the tachometer face in lieu of an oil pressure gauge.

Original tachometers used three screws to mount the face. Note in the above examples the centered screw just above the needle center point and two lower screws above RPM and 100. An aftermarket tachometer has two mounting screws at "10" and "60" RPM numbers. Note the silver outlining of the four smaller circle pods for turn indicators, brake, and high beam warning lamps on the two dash faces below. These are either added by the owner or found on aftermarket replacement dash faces and not something original dash faces had indicating a dash change or dressing up by a previous owner.

This is the U14 I/P Gauge option in a 350cid non-SS El Camino. Contrary to popular belief the gauge option was available in non-SS optioned V8 Chevelle sport coupes, convertibles, and pickups as well.

The Monte Carlo dash is often installed in Chevelles with a claim something like, "...the factory ran out of Chevelle dash assemblies and substituted the Monte Carlo dash to keep the line moving." To date I've not seen one documented case of this happening. Sub assemblies such as a dash assembly would be on hand before the particular car was scheduled to be built; running out of a dash assembly seems highly unlikely. In any event, the Monte Carlo dash is easy to spot with its wood-grain appliqué. All Monte Carlos got the round face dash. The base dash included the fuel gauge, speedometer and clock.

When RPO U14 Instrument Panel Gauges were ordered they were placed in the same location as the gauge package would be on a Chevelle.

While there's nothing really wrong with a reproduction dah as originals are often damaged but you might want to be aware of some things to look for. In the example here, note the lettering on the WASHER WIPER. The letters have a very small height (from the dash outward) but are not white. The lettering on LIGHTER is the same way.

Miscellaneous SS Information

The RPO Z25 SS396 option included the 350hp, Turbo-Jet 396 V8, dual exhaust, special domed hood, black-accented grille, power disc brakes, sport wheels, wide-oval white lettered tires, wheel opening moldings, black resilient rear bumper panel, bright engine accents, and special chassis features. The SS396 option added $445.55 to the base price of the Malibu. Also required with the SS396 option was either the Muncie M20/M21 4-speed transmission at $184.80 or the M40 TH400 3-speed automatic at $221.80; in total the SS396 option added $630.35 ($445.55+$184.80) or $667.35 ($445.55+$221.80).

The RPO Z15 SS454 option included the same basic equipment as the RPO Z25 SS396 option with the primary exception of the engine where the 350hp 396 was replaced with the 360hp 454. The SS454 option added $503.45 to the base price of the V8 Malibu. Also required with the SS454 option was either the Muncie M22 4-speed transmission at $221.80 or the M40 TH400 3-speed automatic at $221.80; in total the SS454 option added $725.25 ($503.45+$221.80).

All SS396- and SS454-optioned Chevelles came with a 12-bolt rear end but Positraction was still an option; an open rear end was standard. However, a 12-bolt rear end, as well as Positraction, was available on non-SS396- and non-SS454-optioned Chevelles as well so the presence of a 12-bolt (with or without Positraction) is not an indication of a 1970 SS396- or SS454-optioned Chevelle. There are some rear end stamped ratio codes that are unique to the SS454-optioned Chevelles such as CRU, CRV, and CRW. Rear end codes for the 396 (402) are not SS396-specific though as those were also used with LS3 and L48 engines as well. See the rear axle code section of 1970 for more.

Both the SS396 and SS454 got the same SS grille emblem but the front fender emblems did distinguish between "SS 396" and "SS 454" and the Custom El Camino also sported "SS 396" or "SS 454" on the tailgate as appropriate. The sport coupe and convertible had an "SS" logo on the rear bumper pad. A bi-product of the rear bumper pad was no rear bumper guards were possible on either SS option due to the pad.

Several rear end ratios were available on SS-optioned Chevelles and a couple of those were also available as options with non-SS L48 350cid Chevelles. Data is taken from build sheets and/or warranty card Protect-O-Plates. See all 1970 rear axle codes and ratios here.

What Did The SS Options Add or Take Away?

The base Chevelle Standard (13437) is almost devoid of external brightwork. No bright rocker molding, no door and quarter bolt molding, no roof drip rail molding - pretty much a basic car.

The non-SS optioned Malibu has bright lower rocker moldings. Often early owners and even dealers would install these to 'dress up' their SS396/SS454. No SS396/SS454 optioned Malibu has ever been documented as coming from any final assembly plant with these moldings.

Prefix	Axle Ratio
CCF	3.31:1 ~ 12-bolt Positraction (L34/402 & L48/350-4)*
CCO	2.56:1 ~ Positraction (El Camino L34/396)*
CCW	3.31:1 ~ 12-bolt (L34/402 & LS3/402 M.C.)*
CKD	2.73:1 ~ 12-bolt (L48/350-4 & LS3/402)*
CKF	3.55:1 ~ 12-bolt Positraction (L78)*
CKJ	3.55:1 ~ 12-bolt (L78/402)*
CKK	4.10:1 ~ 12-bolt Positraction (L78/402)*
CRK	2.56:1 ~ 12-bolt Positraction (Monte Carlo LS5/454)*
CRU	3.31:1 ~ 12-bolt (LS5/454 & LS6/454)*
CRV	3.31:1 ~ 12-bolt Positraction (LS5/454 & LS6/454)*
CRW	4.10:1 ~ 12-bolt Heavy Duty (LS6/454)*

Positraction 4.10:1 ring gear

Hood & Deck Stripes

RPO D88 Hood & Deck Stripes. Some misconception with this option. RPO D88 was available on any L6 or V8 Malibu coupe, convertible, or El Camino whether either SS option was ordered or not. To refer to a standard SS396 or SS454 optioned Malibu as "stripe delete" is incorrect - just as it'd be incorrect to refer to any Chevelle without power steering as "power steering delete." RPO D88 was an option, therefore it couldn't be "deleted" if it wasn't ordered or part of another option package. When the D88 option (or ZL2) was ordered on the Custom El Camino, stripes were only applied to the hood. Stripe color was dependent on the color of the top, not the interior color. See Exterior-Interior Combinations/Seat Belts/Stripe Colors for more details.

ZL2 Cowl Induction Hood

This brings us to RPO ZL2, the cowl induction hood option. D88 Hood & Deck Stripes were part of this option package. Therefore the stripes could be deleted on request, and often times were. The second part of the ZL2 cowl induction hood package were the hood pins. Contrary to other reports, hood pins were only standard with the ZL2 option package; hood pins did not come standard on the SS domed hoods and did not carry a separate RPO number that would make them available to other 1970 Chevelles. They could easily be purchased over the counter from Chevrolet or in the aftermarket and added by the owner. I went to a Chevrolet dealer in the early 70s and purchased a pair to install on my 1967 SS396 rather than buy some aftermarket kits.

As mentioned before, one of the items in both SS options was a domed hood. Some refer to this hood as a non-functional cowl hood but I disagree, it is a functional hood - it performs its function - and it's not a cowl induction hood. I'm sure what people refer to as 'non-functional' is in comparison to the optional RPO ZL2 cowl induction hood.

This is the domed hood the came standard on both SS396 and SS454 Chevelles.

This is the same domed hood when RPO D88 Hood & Deck stripes were ordered. Yes, the stripes were an option on both SS396 and SS454 Chevelles. Since this is not the ZL2 Cowl Induction hood, these stripes were optional, there is no such thing as 'stripe delete' on a standard, SS396 or SS454 domed hood.

When RPO ZL2 was checked the standard domed hood was replaced with a cowl induction hood that has a vacuum controlled 'flapper' that would open when the engine was under throttle. Part of the ZL2 option was the D88 Hood & Deck stripes. These could be deleted when ordering the ZL2 at the buyer's request, unlike the mistaken notion they could be deleted from the special domed hood when they were an option on the domed hood (and the standard Malibu hood as well).

F41 Suspension

Both SS options came standard with RPO F41 Special Performance Front & Rear Suspension consisting of H.D. springs with matching shock absorbers, boxed rear lower control arms, a larger front sway bar (1" vs. 1.25"), and a rear sway bar. This was only standard on the Malibu sport coupe and convertible, the El Camino did not get RPO F41 and could not order it.

Hard to see in the photo but the boxed rear lower control arm has an additional plate welded to the bottom of the (normally) U-shaped control arm.

Miscellaneous

The special SS wheels were essentially the same as the 1969 SS396 wheels and carried no RPO number as they were exclusive to the two SS options and part of those options.

The Malibu sport coupe and convertible grille shows the brightwork as well as a bow tie emblem along with amber color parking lamp lenses with clear bulbs.

The Malibu sport coupe and convertible "SS" grille sported blacked-out bars with "SS" emblem (regardless of engine size) and clear parking lamp lenses with amber bulbs.

Oshawa, Ontario Canada-built 1970 SS optioned Malibus have the grille surround molding painted a semi-gloss black instead of body color like U.S-built 1970 SS optioned Malibus. ~ Courtesy Rick Peters

Another Canadian SS optioned Malibu, this time in Fathom Blue. Also note bright trim under the headlamps indicating an early Chevelle. ~ Courtesy Jack Aaparicio

A bit of trivia...neither 1970 SS Equipment package would be ordered with rear bumper guards (RPO V32) due to the SS pad on the rear bumper.

It's a commonly held belief that all SS optioned Malibus from the Kansas City plant have the letter "L" under the lower body paint code. While I must admit this has been the case on over 99% of 1969 and 1970 Kansas City-built, SS-optioned Malibus, there is no documentation or mention of this as being fact that has ever turned up, at least in the circles I am around. Here is a perfect example of a 1970 SS454 optioned Malibu convertible from Kansas City without this infamous letter along with a relevant portion of the build sheet.

Note the highlighted numbers/letters indicating this trim tag goes with this car.